Show simple item record

HDPE (CM1) optical birefringence pattern in cross-slot flow, piston speed 4.4mm/s, 175C

dc.creatorHassell, David
dc.date.accessioned2018-11-24T13:10:27Z
dc.date.available2008-09-05T14:24:39Z
dc.date.available2018-11-24T13:10:27Z
dc.date.issued2008-09-05T14:24:39Z
dc.identifierhttp://www.dspace.cam.ac.uk/handle/1810/198310
dc.identifier.urihttp://repository.aust.edu.ng/xmlui/handle/123456789/2771
dc.description.abstractThe optical birefringence pattern obtained from lightly branched high density polyethyene (HDPE - produced by metallocene catalysis polymerisation) flowing in a cross-slot multi-pass rheometer cell. Experiment carried out on the Cambridge Multi Pass Rheometer (MPR4) at a piston speed of 4.4 mm/s at 175C. The geometry generates a flow field with an extensional component at the centreline. If the no slip condition at a solid surface is satisfied, the side walls are high shear rate regions. The experiments were carried out to evaluate the material behaviour in extensional flow. At low extensional rates, an almost Newtonian stress profile is exhibited.
dc.subjecthigh density polyethylene
dc.subjectcross-slot flow
dc.subjectmulti-pass rheometer
dc.subjectbirefringence
dc.subjectextensional flow
dc.subjectrheology
dc.titleHDPE (CM1) optical birefringence pattern in cross-slot flow, piston speed 4.4mm/s, 175C
dc.typeVideo


Files in this item

FilesSizeFormatView
CM1 10mms 175C 5_47_output.mpg2.045Mbvideo/mpegView/Open

This item appears in the following Collection(s)

Show simple item record