Show simple item record

Robust Execution of Bipedal Walking Tasks From Biomechanical Principles

dc.date.accessioned2006-06-30T14:42:28Z
dc.date.accessioned2018-11-24T10:24:57Z
dc.date.available2006-06-30T14:42:28Z
dc.date.available2018-11-24T10:24:57Z
dc.date.issued2006-04-28
dc.identifier.urihttp://hdl.handle.net/1721.1/33229
dc.identifier.urihttp://repository.aust.edu.ng/xmlui/handle/1721.1/33229
dc.descriptionPhD thesis
dc.description.abstractEffective use of robots in unstructured environments requires that they have sufficient autonomy and agility to execute task-level commands successfully. A challenging example of such a robot is a bipedal walking machine. Such a robot should be able to walk to a particular location within a particular time, while observing foot placement constraints, and avoiding a fall, if this is physically possible. Although stable walking machines have been built, the problem of task-level control, where the tasks have stringent state-space and temporal requirements, and where significant disturbances may occur, has not been studied extensively. This thesis addresses this problem through three objectives. The first is to devise a plan specification where task requirements are expressed in a qualitative form that provides for execution flexibility. The second is to develop a task-level executive that accepts such a plan, and outputs a sequence of control actions that result in successful plan execution. The third is to provide this executive with disturbance handling ability.Development of such an executive is challenging because the biped is highly nonlinear and has limited actuation due to its limited base of support. We address these challenges with three key innovations. To address the nonlinearity, we develop a dynamic virtual model controller to linearize the biped, and thus, provide an abstracted biped that is easier to control. The controller is model-based, but uses a sliding control technique to compensate for model inaccuracy. To address the under-actuation, our system generates flow tubes, which define valid operating regions in the abstracted biped. The flow tubes represent sets of state trajectories that take into account dynamic limitations due to under-actuation, and also satisfy plan requirements. The executive keeps trajectories in the flow tubes by adjusting a small number of control parameters for key state variables in the abstracted biped, such as center of mass. Additionally, our system uses a novel strategy that employs angular momentum to enhance translational controllability of the system s center of mass. We evaluate our approach using a high-fidelity biped simulation. Tests include walking with foot-placement constraints, kicking a soccer ball, and disturbance recovery.
dc.format.extent407 p.
dc.format.extent19361102 bytes
dc.format.extent7126131 bytes
dc.language.isoen_US
dc.subjectbiomechanics
dc.subjectnonlinear control
dc.subjecttemporally flexible plan execution
dc.titleRobust Execution of Bipedal Walking Tasks From Biomechanical Principles


Files in this item

FilesSizeFormatView
MIT-CSAIL-TR-2006-030.pdf7.126Mbapplication/pdfView/Open
MIT-CSAIL-TR-2006-030.ps19.36Mbapplication/postscriptView/Open

This item appears in the following Collection(s)

Show simple item record