• Computational Insight into Graphene Functionalization for DNA-Sequencing Application: A DFT Approach 

  Adnan, Aliyu (AUST, 2024-06-10)

  Most diseases such as cancer, gene mutation or infections among humans are due to DNA nucleotides mis-sequence. Deoxyribonucleic acid (DNA) is vital in life science and its sequence detection is imperative in the field of ...
  
  
• Implantable Resorbable and Non Resorbable Magnetite Nanocomposite For Localize Drug Delivery and Hyperthermia in Breast Cancer Treatment. 

  Onyekanne, Maria Chinyerem (AUST, 2017-05-09)

  The work presents the comparative studies of the potentials of the implantable magnetite nanocomposites of both resorbable and non-resorbable localized treatment of breast cancer through hyperthermia. Magnetite reinforced ...
  
  
• Kinetics and Controlled Localized Drug Release From Chitosan-Ascorbic Acid Complex Based Microparticles For Potential Treatment of Triple Negative Breast Cancer 

  Nwazojie, Chukwudalu Clare (AUST, 2018-12-10)

  Triple Negative Breast Cancer (TNBC) is the most predominant form of breast cancer among women of African descent. Breast cancers affects many women globally and the existing treatment methods, such as chemotherapy, have ...
  
  
• Mechanical Performance of PVA/PAN Complexed with Aluminium Oxide (Al2O3) Nanopaticles for Solid Polymer Electrolyte 

  Daudu, Suleiman Danjuma (AUST, 2022-11-10)

  Interest in solid polymer blends has increased due to the demand for flexible, lightweight, and long-lasting energy devices. Traditional lithium-ion batteries contain liquid electrolytes that pose a serious safety risk ...
  
  
• Effect of Partial Replacement of Cement with Metakaolin on the Physio-Mechanical Properties of Excavated Soil Reinforced with Natural Borassus Fruit Fibre. 

  Olanipekun, Khadijat Adeola (AUST, 2023-06-07)

  Large amounts of excavated soil, both clean and polluted, are frequently produced during construction projects which are typically disposed of in landfills. This research explored a method to re-use the excavated soil as ...
  
  
• Surface Morphology and Mechanical Characterization of MoO3/PEDOT:PSS Blend Thin Films For Organic Solar Cells and Light Emitting Diode Applications 

  Kum, Tatchen Buh (AUST, 2022-09-07)

  Access to cheap and reliable electricity is a requirement for improved quality of life and industrialization. Solar energy harvesting for electricity generation has been a promising area where solar cells are combined into ...
  
  
• Assessment of Beneficiation Process of a Nigerian Barite Source for Utilization as Oil Drilling Mud 

  Afolayan, David Oluwasegun (2017-12-12)

  The texture and size distribution of various species of gangue minerals affect the beneficiation of barite and lower the specific gravity of barite as-mined. About 9% of the barite used in the oil industry in Nigeria is ...
  
  
• The Effect Of Osteogenesis on the Mechanical Properties of a 3-D Polylactic Acid Scoffold 

  Ogbonnia, Chinaza Esther (AUST, 2021-06-10)

  Poly-Lactic Acid is used widely in biomedical applications due to its good biocompatibility (i.e. biological and chemical inertness) and biodegradability. The area of tissue Engineering has been explored for the regeneration ...
  
  
• Evaluation of Some Characteristics of the Barite Deposits in Ribi, Nassarawa State for Industrial Application 

  Olanrewaju, Ibrahim Habib (AUST, 2019-07-15)

  This study aimed at characterizing and evaluating the viability of barite deposits within Ribi for industrial applications. There is an inadequacy of information as regards mineralization, chemical and geotechnical properties ...
  
  
• Earth-Based Construction Materials Reinforced with Tropical Plants and Recycled Waste Cellulose Pulp Fibre: Performance and Durability Assessment 

  Tido, Tiwa Stanisla (2021-02-20)

  Due to the growing concern of deforestation, renewable materials such as recycled cellulosic waste and non-wood fibres provide an alternative solution for partial replacement of wood resources as a reinforcement agent in ...
  
  
• 3d Printing Scaffolds for Breast Tissue Engineering Applications 

  Azuka, Alex (2021-04-12)

  Recently, the field of Tissue Engineering has explored the potential for the regeneration of many organs and tissues in the human body. The aim of this study applied to breast tissue engineering is to overcome the major ...
  
  
• Effect of Annealing on the Morphological and Optoelectronic Properties of Ch 3 Nh 3 Pb I 3 Thin Films for Perovskite Solar Cell Applications 

  Apam, Francis Akudago (2020-03-12)

  Organolead Trihalide Perovskites (OTPs) is one of the third generations’ photovoltaic technologies which have achieved excellent power conversion efficiency (PCE) of 3.8% in 2009 to 23.7% in 2018, just within nine years ...
  
  
• Numerical Study of Mechanical Properties of Hybrid Solar Cell Thin Film Layers by Nanoindentation 

  Ajah, Jamael (2021-06-12)

  The evolution in the use of solar panels for generation of electricity has been immense throughout the world, especially in the last decade. This has seen both organic and inorganic solar panels, with both of them possessing ...
  
  
• Geotechnical Properties of Lateritic Soil Stabilized with Bone Ash and Hydrated Lime for Road Construction Applications 

  Etekume, Chukwutem (2020-12-12)

  This research is focused on evaluating the geotechnical properties of lateritic soil stabilized with bone ash and hydrated lime to improve the strength and quality of Nigerian lateritic soil (acquired from Galadimawa in ...
  
  
• Optimization of Polyvinylpyrrolidone (PVP) as A Potential and Suitable Binder for Electrochemical Supercapacitor 

  Gono, Sylvester (2020-12-12)

  Polyvinylpyrrolidone (PVP) is suitable alternative to the polyvinylidene fluoride (PVDF) often used binder in electrode of supercapacitor. The major problem of the PVP is the part it plays in the conductivity of ions in ...
  
  
• Applications of Additive Manufacturing in the Production of Automobile Parts from Polymers and Natural Fiber Reinforced Polymer Composites 

  Kumachang, Cyril (2021-04-12)

  The rate of CO2 emissions from manufacturing industries and some manufactured products in service or at the end-of-life use is really troubling and needs attention. The CO2 contribution from the automotive or transportation ...
  
  
• The Effect of Infusing Tio2 Nanoparticles on the Optoelectronic Properties of Mehppv Thin Films for Oled Fabrication. 

  Nalyanya, Fred (2021-09-12)

  The use of MEHPPV in OLED application has increased currently. The main issue surrounds its ability to perform well optically and electronically. To enhance the performance of MEHPPV polymer in this sense, this study looks ...
  
  
• Hydrometallurgical Recovery of Lithium and Cobalt from Spent Lithium-Ion Batteries 

  Obetta, Emmanuel Chinonso (2019-07-12)

  The demand for lithium-ion batteries is high because of their high energy and power density, which most time is influenced by the lithium-ion cathode chemistry. However, the need for expensive and scarce metals, such as ...
  
  
• Development of Implantable Scaffold for Ear Tissue Cartilage with Potential Application in Bionic Ears 

  Ogunkuade, Opeyemi (2021-06-16)

  The technology of Organ regeneration and Bionics is fast being adopted to the 21st century medicine. While the regenerative organs will help overcome the challenge of donor and acceptor of organs, bionics present with an ...
  
  
• Electrochemical Performance of Coconut Coir Fibers as a Potential Source of Carbon Materials for Electrochemical Supercapacitors 

  Ayodamola, Kaosarat Raji (2020-04-12)

  This work aims to investigate the use of coconut coir fibre as a potential source of carbon for supercapacitor electrode materials. The chemical activation process was adopted using KOH as an activating agent. The carbonization ...
  
  

View more