Show simple item record

The Calcomp Plotter as an Output Device

dc.date.accessioned2004-10-04T14:43:08Z
dc.date.accessioned2018-11-24T10:12:06Z
dc.date.available2004-10-04T14:43:08Z
dc.date.available2018-11-24T10:12:06Z
dc.date.issued1967-07-01en_US
dc.identifier.urihttp://hdl.handle.net/1721.1/6145
dc.identifier.urihttp://repository.aust.edu.ng/xmlui/handle/1721.1/6145
dc.description.abstract(1)CHAR PLOT (see AI Memo 125) has been modified for TS. [It may be found on MS4 with the non-TS version]. The following changes should be noted: CRKBRK (now called PLTBRK in the non-TS CHAR PLOT), SUBPLT (which is not needed since PLOTC can be called recursively), PP (ditto), LBUFF and LWBUFF (as the TS system does the buffering) do not exist in the TS version. CRKCHN, now called PLTCHN (in both TS and non-TS versions) does exist. The command 1110 ... (go to the effective address at process time) still exists, bit in TS return is with "POPJ P", rather than JRST 12, @ PLTBRK". The character codes 0 and 200 (lower case 0) respectively OPEN and CLOSE the plotter. (2) CHARPL SCOPE may soon be also so modified for TS. (3) SCOPE PLOT is unchanged. (4) None of the above TS routines can be used easily at present due to the lack of TS STINK.en_US
dc.format.extent2391562 bytes
dc.format.extent62536 bytes
dc.language.isoen_US
dc.titleThe Calcomp Plotter as an Output Deviceen_US


Files in this item

FilesSizeFormatView
AIM-138.pdf62.53Kbapplication/pdfView/Open
AIM-138.ps2.391Mbapplication/postscriptView/Open

This item appears in the following Collection(s)

Show simple item record