Browsing Materials Science and Engineering by Subject "Prof Wole Soboyejo"
Now showing items 1-20 of 39
-
Abrasive Wear Studies of Pack Cyanided Mild Steel (PCMS)
(2011-12-15)This work aimed at using processed cassava leaves to pack cyanide mild steel (MS) under different treatment conditions and investigating the wear properties of the pack cyanided mild steel (PCMS). Pack cyaniding (PC) of a ...
-
Adhesion and Optoelectronic Properties of Organic Light Emitting Devices (OLEDs) and Hybrid Organic-Inorganic Light Emitting Devices (HOILEDs) with Tio 2 Nano-Particles
(2010-12-17)This study examines the basic operation of an Organic Light Emitting Device (OLED) and Hybrid Organic-Inorganic Light Emitting Devices (HOILED) by looking at the individual characteristics of the each layer which makes up ...
-
Annealing Heat Treatment of Organic Material for Controlled Bulk Heterojunction Solar Cells
(2013-05-15)The morphology of active layers of organic solar cells plays crucial roles in achieving good performing devices with longer life span. The process of fabricating these devices involved post deposition thermal annealing, ...
-
Bacterial Remediation of Polyethylene
(2011-12-15)Improper disposal of commodity plastics e.g. polyethylene (PE) in the environment causes land pollution, soil infertility, is unsightly and poses dangers to plant and animal life. The current effort describes the bacteria ...
-
Bioinspired Design
(2013-05-12)Bioinspired design involves the use of concepts observed in natural biological materials in engineering design. The hope is that the leveraging of biological materials in the engineering domain can lead to many technological ...
-
Biosynthesis of Magnetic Nanoparticles for Cancer Detection and Treatment
(2011-12-15)Chemical and physical methods for the synthesis of magnetic nanoparticles for cancer detection and treatment often involve toxic chemicals, high cost and the formation of non-stable nanoparticles. This prompted the development ...
-
Cell Surface Interaction on a Multi - Scale
(2014-12-15)The increasing rate of cancer patients worldwide, and especially Africa has led to numerous efforts to battle it. One approach to this has been localized drug delivery to reduce the quantity of drugs needed for therapeutic ...
-
Clay Filtration of Microbes and Fluoride
(2010-06-07)Consumption of contaminated water may result in several water-borne diseases, including hepatitis, typhoid, cholera, dysentery and other diseases that cause diarrhoea. One of the ways this problem can be prevented is by ...
-
Co2 Corrosion of the Welded Joint of an X65 Steel: Analysis of Surface Film Formed
(2014-12-12)Carbon dioxide (CO2) corrosion, also known as sweet corrosion of steels has increased in recent years due to the injection of CO2 into oil wells in order to increase oil recovery and production. Despite the fact that carbon ...
-
Controlled Release of Fungicidal Antimicrobials on Packaged Foods
(2014-12-15)This paper presents the effect of polymer concentration on the release of fungicidal antimicrobial (AM) agent to prolonging the shelf life of packaged food. This project aimed to produce and test AM films with varying ...
-
Corrosion Behavior of Epoxy (SIGMALINE) Coated X65 Steel in some Selected Corrosive Media
(2014-12-15)Like any industry, the economic success of the oil and gas industry can be no swifter than its success in corrosion control/prevention. Some oil and gas industries operate in hostile offshore environment that harbors ...
-
Corrosion Behaviour of Low Carbon Steel used in Oil and Gas aboveground Storage Tanks
(2014-12-15)The cost and losses associated with corrosion annually is approximately $ 276 billion or 3.1% of the GDP in the USA, 3 - 4% of GNP in Australia, Great Britain, Japan and other countries. The associated cost and losses ...
-
Development of Implantable Scaffold for Ear Tissue Cartilage with Potential Application in Bionic Ears
(2021-06-16)The technology of Organ regeneration and Bionics is fast being adopted to the 21st century medicine. While the regenerative organs will help overcome the challenge of donor and acceptor of organs, bionics present with an ...
-
The Effect of Bitumen Coatings on the Corrosion of Low Carbon Steels (API 5l X65)
(2013-05-12)The corrosion behavior of uncoated and cut-back bitumen coated X65 Steel samples are being investigated in environments of different pH (2, 3, 4 and 7). Immersion tests were carried out on the samples at 25oC. The comparison ...
-
Effect of Pressure on the Performance of Organic Light Emitting Devices Fabricated by Cold Welding
(2013-04-15)Analytical and finite element models were used to simulate additive cold welding patterning processes. The effects of adhesion, pressure, thin film (layer) thickness and dust particle modulus (between the contacting surfaces) ...
-
Effect of Sintering Time on Mechanical Properties of Porous Ti-6al-4v Implant
(2016-07-12)Titanium alloy is popular in biomedical application owing to its low density, good biocompatibility (i.e. biological and chemical inertness) and excellent mechanical properties. Due to the high disparity between the implant ...
-
Effects of Bending and Stretching on Hybrid Organic-Inorganic Trihalide Perovskite Solar Cells
(2014-12-15)In the recent decade, hybrid organic- inorganic trihalide perovskite solar cells have attracted significant interest from the scientific community due to their unique optoelectrical properties, ease and low cost of ...
-
Effects of Cassava-Leaf-Enhanced Carbonitriding on Case-Hardening of Barite Mining Tools
(2017-12-12)This study presents the results of an experimental study of the effects of cassava leaves carbonitriding on the microstructure, hardness and abrasive wear behaviour of AISI 1065 and AISI 1070 steels used for barite mining ...
-
Failure Mechanisms of Epoxy Coatings in Pipelines
(2013-05-12)Epoxy, a thermosetting polymer due to its attractive properties, has been widely used in many industries as a coating material such as the oil and gas industries. This study provides an insight into the corrosion behavior ...
-
Fracture Mechanics Approach for the Maintenance of Offshore Oil and Gas Pipeline
(2014-12-15)Failure of offshore oil and gas pipelines occurs under certain conditions due to some applied mechanical forces. These conditions constitute a potential threat to the integrity of in-service life span of the pipelines ...